Gallery » Contract Work » Loco Rear Dragbox
 
20130608 100902
Image 1 of 8
The dragbox was still being worked on in June 2013. Here the internal mechanism for the rocking grate can be seen.
Photo: Andie Shaw
009
Image 2 of 8
On the last few days of July 2013 the dragbox side faces were being accurately machined to go between the frames.
Photo: Jon Whalley
011
Image 3 of 8
The dragbox side faces after being accurately machined to go between the frames.
Photo: Jon Whalley
CRW 2840-01
Image 4 of 8
The rear drag box fitted into place as seen on the 12th October 2013.
Photo: Laurence Armstrong
CRW 2842-01
Image 5 of 8
The rear drag box in place but with some fitted bolts still to be inserted.
Photo: Laurence Armstrong
CRW 2841-01
Image 6 of 8
The rear drag box showing the fitted bolts on the left hamd side attaching it to the frames .
Photo: Laurence Armstrong
CRW 2843-01
Image 7 of 8
An upper view from inside the frames showing the front face of the drag box. The two holes are where the push rods will emerge for the rocking grate, the mechanism being hidden inside the drag box.
Photo: Laurence Armstrong
CRW 2844-01
Image 8 of 8
A lower view from inside the frames shoing the front side of the drag box.
Photo: Laurence Armstrong
Generated by jAlbum 12.1.8, Matrix 15.0
empty