Axle boxes removed from the Loco's wheelsets ready for cleaning.
Photo: Steve Holland

Wheelset axle after removal of axle boxes.
Photo: Steve Holland

The axle boxes after being cleaned - what a difference when compared to the before pictures.
Photo: Steve Holland

The position of the tender chassis at the end of the Saturday.
Photo: Laurence Armstrong

So, first job of the day is to remove the small door.
Photo: Laurence Armstrong

View of the tender frame outside its new home for the next few years.
Photo: Laurence Armstrong

Next job - make a bigger door to get the tender frame through.
Photo: Laurence Armstrong

The preparation turned out to be the difficult bit as the tender moved inside very easily.
Photo: Laurence Armstrong

A view across form the loco frames to the tender.
Photo: Laurence Armstrong

The Krauss-Helmholtz truck ball joint and brasses.
Photo: Laurence Armstrong

A final view showing the loco frames being used to store NGG16 No140's superheater tubes!
Photo: Laurence Armstrong

The tender's front bogie after removal from under the chassis.
Photo: Steve Holland