Rectangular holes now repaired to their correct shape.
Photo: Laurence Armstrong

Rectangular holes now repaired to their correct shape.
Photo: Laurence Armstrong

Grease lubrication runs are being fitted for the rear ponytruck piviot in the rear frame stretcher.
Photo: Laurence Armstrong

The mountings for the rear frame stretcher being identified to be replaced by fitted bolts.
Photo: Laurence Armstrong

The mountings for the rear frame stretcher being identified to be replaced by fitted bolts.
Photo: Laurence Armstrong

The last remaining rear dragbox bracket having its rivets drilled out prior to removal.
Photo: Laurence Armstrong

The old dragbox is seen in the foreground at Brunswick Ironworks where it is being used as a guide for it's replacement. This can also be seen on the bench at the rear.
Photo: Laurence Armstrong