Ground off rivet heads on the rear drag box. These will shortly be drilled out.
Photo: Laurence Armstrong

Ground off rivet heads on the rear drag box. These will shortly be drilled out.
Photo: Laurence Armstrong

Rivets already removed from the rear drag box beam. A number of bolts have now replaced these to enable later controlled removal.
Photo: Laurence Armstrong

The rear of the left hand (Fireman's) side cylinder showing studs being inserted. It also shows the fresh finish to the newly rebored cylinder.
Photo: Laurence Armstrong

The rear of the left hand (Fireman's) side cylinder showing studs inserted and tightened. The cylinder bore has now been greased to prevent rusting.
Photo: Laurence Armstrong

The front of the left hand (Fireman's) side cylinder showing the new studs inserted.
Photo: Laurence Armstrong

The rear of the right hand (Driver's) side cylinder showing studs inserted.
Photo: Laurence Armstrong

The front of the right hand side cylinder showing studs inserted.
Photo: Laurence Armstrong