First job was sorting through the motion ready for the machining and fitting of new bushes.
Photo: Laurence Armstrong

The motion was then matched with the various pins and left out ready to be worked on by the full time staff.
Photo: Laurence Armstrong

The motion Crossheads left ready for maching by the full time staff.
Photo: Laurence Armstrong

Motion left out ready for maching by the full time staff.
Photo: Laurence Armstrong

New lubrication fittings for the slide bars.
Photo: Laurence Armstrong

New lubrication fittings for the slide bars on the left hand side (but still needing their brass pipe fittings to be attached).
Photo: Laurence Armstrong

One of the weirs for the steam sander mechanism that need to be fitted against the side of the frames between the wheels.
Photo: Laurence Armstrong