The new lubrication pipe for a tender bogie centre pivot.
Photo: Laurence Armstrong

The new lubrication pipe for a tender bogie centre pivot will terminate in an oil-pot just underneath the tender body.
Photo: Laurence Armstrong

With the cylinder cladding taken off for painting the opportunity was taken to clean and repaint the cylinder castings.
Photo: Laurence Armstrong

A closer view of the backplate cladding sheet that was completed during the interim working parties.
Photo: Laurence Armstrong

The firebox front cladding sheet had also been previously cut to shape in the intermediate working parties.
Photo: Laurence Armstrong

A selection of pipework for the ashpan drench ready to be fitted.
Photo: Laurence Armstrong

Some of the ready cut cab sheeting.
Photo: Laurence Armstrong

We now have a vacuum pipe at the rear of the tender.
Photo: Laurence Armstrong

Shunting the tender and loco to reverse their positions.
Photo: Laurence Armstrong

The new positions of the loco and tender in the Loco Shed.
Photo: Laurence Armstrong