Inserting the driver's side piston and rings.
Photo: Andrew Cole

The fully inserted piston.
Photo Laurence Armstrong

The fireman's side piston has also been fitted with its rings.
Photo Laurence Armstrong

And at the other end of the fireman's side piston.....
Photo Laurence Armstrong

A cabside being checked for the location of the cabside plates. (Note this is a new WHR plate rather than the original)
Photo Laurence Armstrong.

Fitting the various cab sheets together.
Photo Laurence Armstrong

The fireman's side lubricator for the front (Kraus Helmholtz) pony truck.
Photo Laurence Armstrong

The various components and laser-cut pieces for the flange lubricators to be fitted to the tender pony truck.
Photo Laurence Armstrong

The state of progress of the lagging on the driver's side.
Photo Laurence Armstrong

The state of progress of the lagging on the fireman's side.
Photo Laurence Armstrong

Securely fixing the lamp bracket in place. .
Photo Adrian Strachan

The assembled cab ready to be trial fitted into place.
Photo: Andrew Cole

And the view from inside.
Photo: Andrew Cole