We've had some new manufacturer's plates made for №134 to replace those missing.
Photo: Laurence Armstrong

One of the rear cylinder covers fitted.
Photo: Laurence Armstrong

Both front covers have been fitted on the Driver's side.
Photo: Laurence Armstrong

Also both front covers have been fitted on the Fireman's side as well as the front steps.
Photo: Laurence Armstrong

A bit of an obscure view, but this is the cab roof in the process of being attached.
Photo: Laurence Armstrong

Pipework in place ready for the slacker pipe and valve.
Photo: Laurence Armstrong

The tender door has also been fitted.
Photo: Laurence Armstrong

A view showing the mechanism allowing the tender's filler door to be opened from the cab.
Photo: Laurence Armstrong

We now have a tender connected to the loco.
Photo: Laurence Armstrong

A view of all the connections needed between the tender and loco as well as the safety chains,
Photo: Laurence Armstrong

The injector overflow has now been fitted.
Photo: Laurence Armstrong

We've also fitted the turbo generator.
Photo: Laurence Armstrong