New grate sections to be ready to be fitted.
Photo: Laurence Armstrong

One job was to add small brass filler pieces to the cab washout plug surrounds to fill where there was a small gap between the surround and the brass angled fillet section.
Photo: Laurence Armstrong

One job was to add small brass filler pieces to the cab washout plug surrounds to fill where there was a small gap between the surround and the brass angled fillet section.
Photo: Laurence Armstrong

One job was to add small brass filler pieces to the cab washout plug surrounds to fill where there was a small gap between the surround and the brass angled fillet section.
Photo: Laurence Armstrong

The larger job being finished off this weekend was the mounting bracket for the rear sanders.
Photo: Laurence Armstrong

One of the mounting bracket for the rear sanders shown here with the sander temporarily fitted.
Photo: Laurence Armstrong

Part of the tidying up of 'loose end jobs' was the fitting of new pins for the blowdown valve cranks.
Photo: Laurence Armstrong

One of the new pins for the blowdown valve cranks after painting.
Photo: Laurence Armstrong

All the cab side windows have now been assembled with their glass and are seen here carefully stacked out of harms way until needed.
Photo: Laurence Armstrong

Again a tidying up job was to paint the recently made rail head 'sweeper' brackets.
Photo: Laurence Armstrong